|
PART Ii [ up to 1989 ] |
|
|
REFEREED JOURNAL PAPERS |
|
| 1 | Naik, N.K. 1979. Development of aircraft production engineering discipline at IIT Bombay, The Journal of the Aeronautical Society of India, 31:119-125. |
| 2 | Rajaiah, K. and N.K. Naik. 1982. Optimum hole shape determination in infinite orthotropic plates under inplane loading by conformal transformation, Mechanics Research Communications, 9:179-185. |
| 3 | Rajaiah, K. and N.K. Naik. 1982, "Discussion on 'Optimization in a Class of Hole Shapes in Plate Structures' by S.K. Dhir and published in the December 1981 issue of the ASME Journal of Applied Mechanics, Vol 48, No 4, pp 905-908," ASME Journal of Applied Mechanics, 49:927-928. |
| 4 | Rajaiah, K. and N.K. Naik. 1983. Optimum quasi-rectangular holes in infinite orthotropic plates under inplane loading, ASME Journal of Applied Mechanics, 50:891-892. |
| 5 | Rajaiah, K. and N.K. Naik. 1983. Hole shapes with minimum stress concentration in infinite isotropic plates using conformal transformation, ISME Journal of Engineering Design, 1:15-19. |
| 6 | Rajaiah, K. and N.K. Naik. 1983. Quasi-rectangular holes with minimum stress concentration in orthotropic plates, Journal of Reinforced Plastics and Composites, 2:164-177 ( Also Vol 3, No 1, p 96, 1984). |
| 7 | Rajaiah, K. and N.K. Naik. 1984. Hole shape optimisation in circular discs with two neighbouring holes, Strain, 20:15-19. |
| 8 | Naik, N.K. and K. Rajaiah. 1984. Minimum SCF for two neighbouring holes in disks by photoelasticity, ASCE Journal of Engineering Mechanics, 110:654-659. |
| 9 | Rajaiah, K. and N.K. Naik. 1984. Hole-shape optimization in a finite plate in the presence of auxiliary holes, Experimental Mechanics, 24:157-161. |
| 10 | Naik, N.K. and K. Rajaiah. 1984. Quasi-square holes with maximum failure strength in orthotropic plates, Composites, 15:310-312. |
| 11 | Naik, N.K. and K. Rajaiah. 1984. Effect of load tilt angle on SCF for optimized quasi-square holes in orthotropic plates, Fibre Science and Technology, 21:255-262. |
| 12 | Rajaiah, K., N. Ramaswamy, N.K. Naik, V.P. Sunder Singh, S. Suryanarayan and C.P. Jain. 1984. Design and development of pultrusion process with induction and dielectric heating for FRP composite manufacture, Transactions of the Indian Institute of Metals, 37:116-125. |
| 13 | Rajaiah, K. and N.K. Naik. 1984. An analytical approach for the optimization of hole shapes in CFRP orthotropic composite plates, The Journal of the Aeronautical Society of India, 36:115-120. |
| 14 | Naik, N.K. and K. Rajaiah. 1985. Effect of change of load direction on SCF for optimized quasi-square hole in isotropic plates, Journal of Ship Research, 29:206-208. |
| 15 | Naik, N.K., R. Ramesh Kumar and K. Rajaiah. 1986. Optimum hole shapes in beams under pure bending, ASCE Journal of Engineering Mechanics, 112:407-411. |
| 16 | Naik, N.K. 1988. Two neighbouring quasi-trapezoidal holes in discs with minimum s.c.f., Strain, 24:51-55. |
| 17 | Naik, N.K. 1988. Photoelastic investigation of finite plates with multi-holes, Mechanics Research Communications, 15:141-146. |
|
REFEREED CONFERENCE PROCEEDINGS PAPERS |
|
| 18 | Naik, N.K. and R.D. Sahani. 1982. Study of adhesive bonded joint parameters, in the Proceedings of the 5th ISME Conference held at Allahabad, pp 193-197. |
| 19 | Rajaiah, K. and N.K. Naik. 1982. Hole shapes with minimum stress concentration in infinite isotropic plates using conformal transformation, in the Proceedings of the 5th ISME Conference held at Allahabad, pp 217-222. |
| 20 | Naik, N.K. and K. Rajaiah. 1984. Minimizing stress concentration in finite plates with two holes, in the Proceedings of the 5th International Congress on Experimental Mechanics (ICEM-5) held at Montreal, Canada, pp 76-80, Society for Experimental Stress Analysis. |
| 21 | Naik, N.K. and R.D. Sahani. 1984. Measurement of residual stresses in composites by hole drilling method, in the Proceedings of the 5th International Congress on Experimental Mechanics (ICEM-5) held at Montreal, Canada, pp 159-163, Society for Experimental Stress Analysis. |
| 22 | Naik, N.K. and K. Rajaiah. 1984. Software development for hole shape optimization in finite plates, in the Proceedings of the International '84 AMSE Conference on Modelling and Simulation held at Athens, Greece, Vol 3.1, pp 11-19. |
| 23 | Naik, N.K. and K. Rajaiah. 1984. Optimum quasi-square hole shapes in orthotropic beams under pure bending, in the Proceedings of the International '84 AMSE Conference on Modelling and Simulation held at Athens, Greece, Vol 3.1, pp 133-135. |
| 24 | Naik, N.K. and K. Rajaiah. 1984. Quasi-rectangular holes with maximum failure strength in large orthotropic plates, in Abstracts of Lectures - Proceedings of the 16th International Congress of Theoretical and Applied Mechanics (ICTAM-16) held at Lyngby, Copenhagen, Denmark, Paper No. 295, IUTAM. |
| 25 | Naik, N.K. 1985. Optimum quasi-rectangular hole shapes in orthotropic beams under pure bending, in the Proceedings of the 30th Congress of ISTAM held at New Delhi, pp 39-46. |
| 26 | Naik, N.K. 1985. Optimum non-central hole shapes with minimum SCF in rotating disks by conformal transformation, in the Proceedings of the 30th Congress of ISTAM held at New Delhi, pp 47-54. |
| 27 | Naik, N.K. 1986. Optimum quasi-rectangular holes with minimum SCF in finite plates under uniaxial loading, in Computational Mechanics '86: Theory and Applications, Volume 2, Proceedings of the International Conference on Computational Mechanics (ICCM-86), eds, G. Yagawa and S.N. Atluri, Springer-Verlag, Tokyo, pp x97-x102. |
| 28 | Naik, N.K. and K.S. Sai Ram. 1986. Effect of fibre and resin properties on stress gradients around openings in FRP orthotropic plates, in the Proceedings of the International Symposium on Composite Materials and Structures (ISCMS), eds, T.T. Loo and C.T. Sun, Technomic Publishing Co., Inc., Lancaster, PA, pp 100-105. |
| 29 | Naik, N.K. and K.S. Sai Ram. 1988. Uniaxial failure of FRP orthotropic laminates with circular holes, in Composite Materials and Structures, Proceedings of the International Conference on Composite Materials and Structures (ICCMS-88), eds, K.A.V. Pandalai and S.K. Malhotra, Tata McGraw-Hill Publishing Company Limited, New Delhi, pp 86-92. |
| 30 | Bhatnagar, N., N.K. Naik and N. Ramakrishnan. 1988. Some preliminary investigations on orthogonal machining of FRP composites, in the Proceedings of the 13th All India Machine Tool Design and Research (AIMTDR-13) Conference, ed, B.N. Lahiri, Jadavpur University, Calcutta, pp B104-B108. |
|
CONFERENCE PRESENTATIONS |
|
| 31 | Molodtsov, G.A. and N.K. Naik. August 1972. Residual microstresses in composite materials, Paper presented at the First Conference on Reinforced Plastics and their Aerospace Applications, VSSC, Trivandrum. |
| 32 | Naik, N.K. and G.A. Molodtsov. 1974. Investigation of residual microstresses in composite materials, Metallurgical Engineer, IIT-Bombay, Volume 5, pp 22-26. |
| 33 | Naik, N.K. September 1979. Development of aircraft production engineering discipline at IIT Bombay, Paper presented at the 31st AGM, AeSI, Bombay. |
| 34 | Naik, N.K., Nitin Rameshchandra and G.R. Shevare. September 1979. Hand-operated honeycomb core expansion set-up, Paper presented at the 31st AGM, AeSI, Bombay. |
| 35 | Naik, N.K. October 1980. Tooling coordination for precision aerospace components, in the Proceedings of ISRO Symposium on Fabrication Technology, VSSC, Trivandrum, Volume I, pp II 231 - II 247. |
| 36 | Naik, N.K. and S.B. Dighe. December 1980. Contouring honeycomb core by chemical milling, in 9th AIMTDR Conference Proceedings, Kanpur, Paper No. 9-AIMTDR/UMP-68. |
| 37 | Shevare, G.R., N.K. Naik and H.N. Kota. December 1980. Computer aided design of surfaces, in 9th AIMTDR Conference Proceedings, Kanpur, Paper No. 9-AIMTDR/CADM-66. |
| 38 | Rajaiah, K., N.K. Naik and R. Ramesh Kumar. December 1982. Use of conformal transformation technique for determination of hole shapes with minimum stress concentration in plates and shells, Paper presented at the Silver Jubilee Symposium on Recent Advances in Mechanics, IIT Bombay. |
| 39 | Rajaiah, K. and N.K. Naik. December 1982. An analytical approach for the optimization of hole shapes in CFRP orthotropic composite plates, Paper presented at the 34th AGM, AeSI, Madras. |
| 40 | Rajaiah, K. and N.K. Naik. December 1982. Minimizing stress concentration around two neighbouring holes in disks and plates with photoelasticity, Paper presented at the 5th ISME Conference, Allahabad. |
| 41 | Naik, N.K. November 1983. Cost of quality in Aircraft Industry, Paper presented at the 35th AGM, AeSI, Bombay. |
| 42 | Naik, N.K. and R.D. Sahani. November 1983. Development of facility for residual stress measurement in FRP composites by hole drilling method, Paper presented at the 35th AGM, AeSI, Bombay. |
| 43 | Naik, N.K., T.C. Gupta and K. Rajaiah. January 1984. Optimum hole shapes in rotating disks by photoelasticity, in the Proceedings of the All India Seminar on Structural Integrity of Rotating Machinery, Organised by the Institution of Engineers (India), Bangalore, Paper 2, pp 1-12. |
| 44 | Naik, N.K. and K.S. Sai Ram. September 1985. Stress gradients around circular holes in FRP laminae, in Abstracts of the Technical Papers - Second National Symposium on Industrial Applications of Composites, Organised by the Indian Society for Composite Materials, Bhopal, pp 3-4. |
| 45 | Naik, N.K., Anoop Jharia and R.P. Shimpi, December 1987. Failure analysis of composite laminates, Paper presented at the 32nd Congress of ISTAM, IIT-Bombay. |
| 46 | Naik, N.K., Ravindra Kumar, Anoop Jharia, S.P. Pai and R.P. Shimpi. December 1987. Uniaxial failure of carbon cloth epoxy quasi-isotropic laminates with circular holes, Paper presented at the 32nd Congress of ISTAM, IIT-Bombay. |
| 47 | Shimpi, R.P. and N. K. Naik. December 1987. Optimum quasi-rectangular holes in orthotropic plates using strain energy consideration, Paper presented at the 32nd Congress of ISTAM, IIT-Bombay. |
| 48 | Naik, N.K. February 1988. Uniaxial failure of CFRP orthotropic laminates with circular holes - effect of process parameters, Paper presented at the Workshop cum Symposium on Composites Design, Bangalore. |
| 49 | Sur, A., N.K., Naik and N. Ramakrishnan. November 1988. Drilling of fibre reinforced plastics, Paper presented at the 13th AIMTDR Conference, Calcutta, Conference Proceedings, p B-93. |
| 50 | Naik, N.K., B. Roy and H. Arya. December 1988. Axial flow fan blades of fibre reinforced plastics, Paper presented at the Seminar on Quality and Technology in Aerospace, HAL, Bangalore. |
| TECHNICAL REPORTS | |
| 51 | Naik, N.K., Nitin Rameshchandra and G.R. Shevare. September 1981. Hand-Operated Honeycomb Core Expansion Set-up, Technical Note No. AE TN 810901, IIT Bombay. |
| 52 | Rajaiah, K. and N.K. Naik. December 1981. Quasi-Rectangular Holes for Minimizing Stress Concentrations in Infinite Plates under Inplane Loading, Technical Report No. AE TR 811201, IIT Bombay. |
| 53 | Rajaiah, K., N. Ramaswamy, N.K. Naik, V.P. Sunder Singh, S. Suryanarayan and C.P. Jain. February 1982. Design, Fabrication and Testing of Composite Structural Elements by Pultrusion Process, ARDB Final Consolidated Technical Report, IIT Bombay. |
| 54 | Naik, N.K., K. Rajaiah and R. Ramesh Kumar. October 1985. Fatigue Characteristics of Aluminim Alloy Plates with Optimized Holes / Openings, ARDB Final Technical Report, IIT Bombay. |
