Changes

Now the generated power should be taken to the different loads depending on their needs i.e. voltage requirements etc. Voltage and current regulators can be used to provide the required voltage and current by the load i.e. converting the high or low voltage or current to the levels required by the load. A suitable way is to use a voltage regulator and current limiter in series so that both voltage and current are in the controlled ranges. Different mechanisms to do this with high efficiencies are present that can be selected on priority basis:

[[File:Reg1.png|frame|left]]

[[File:Reg2.png|frame|center]]

<br \>

Overall linear regulators are simple to use, low cost and less noisy as compared to switching regulators but switching regulators are more efficient and have a high voltage range of operation.<br \> <br \>

Next comes the task of monitoring and controlling the loads whether they are on or off as the status desired by the flight code.