RESEARCH PUBLICATIONS 

REFEREED JOURNAL PAPERS 

1 
Pandya Kedar S. and N. K. Naik. 2016. Nanoparticle dispersed resins and composites under quasistatic loading: Shear plugging behavior, Polymer Composites, 37 (12): 34113414. DOI: 10.1002/pc.23539 
2 
Pandya Kedar S., S. Shaktivesh, H. L. Gowtham, A. Inani and N. K. Naik. 2015. Shear plugging and frictional behaviour of composites and fabrics under quasistatic loading, Strain, 51 (5): 419426. DOI: 10.1111/str.12153 
3 
Jayaprakash K., M. Muthukumar, Y. M. Desai and N. K. Naik. 2015. Vibration induced fatigue analysis of [0n/90n]s simply supported composite plate under central patch impulse loading, ASME Journal of Engineering Materials and Technology, OCTOBER 2015, vol. 137, paper 044501. DOI: 10.1115/1.4030338 
4  Akella Kiran and N. K. Naik. 2015. Composite armour  a review, Journal of the Indian Institute of Science: A Multidisciplinary Review Journal, 95 (3): 297312. 
5 
Pandya Kedar S., Ch. V. Sesha Kumar, N. S. Nair, P. S. Patil and N. K. Naik. 2015. Analytical and experimental studies on ballistic impact behavior of 2D woven fabric composites, International Journal of Damage Mechanics, 24:471511. DOI: 10.1177/1056789514531440 
6 
Naik N. K., Kedar S. Pandya, Venkateswara R. Kavala, Wei Zhang and Nikhil A. Koratkar. 2015. Highstrain rate compressive behavior of multiwalled carbon nanotube dispersed thermoset epoxy resin, Journal of Composite Materials, 49: 903910. DOI: 10.1177/0021998314527329 
7 
Gowtham H. L., Jayaram R. Pothnis, G. Ravikumar and N. K. Naik. 2015. Dependancy of dynamic interlaminar shear strength of composites on test technique used, Polymer Testing, 42: 151159. http://dx.doi.org/10.1016/j.polymertesting.2015.01.012 
8 
8. Pandya Kedar S. and N. K. Naik. 2015. Energy absorption capability of carbon nanotubes dispersed in resins under compressive high strain rate loading, Composites: Part B, 72: 4044. http://dx.doi.org/10.1016/j.compositesb.2014.11.026 
9 
Pandya Kedar S. and N. K. Naik. 2015. Analytical and experimental studies on ballistic impact behavior of carbon nanotube dispersed resin, International Journal of Impact Engineering, 76: 4959 http://dx.doi.org/10.1016/jijimpeng.2014.09.003 
10 
Shaktivesh, N. S. Nair and N. K. Naik. 2015. Ballistic impact behavior of 2D plain weave fabric targets with multiple layers: Analytical formulation, International Journal of Damage Mechanics, 24 (1): 116150. DOI: 10.1177/1056789514524074 
11 
Naik N.K., Kedar S. Pandya, V.R. Kavala, W. Zhang and N. A. Koratkar. 2014. Alumina nanoparticle filled epoxy resin: high strain rate compressive behavior, Polymer Engineering and Science, 54: 28962901. DOI 10.1002/pen.23850 
12 
Rajagopal A. and N.K. Naik. 2014. Oblique ballistic impact behavior of composites, International Journal of Damage Mechanics, 23(4): 453482. DOI: 10.1177/1056789513499268 
13 
Goel, R., Mandar D. Kulkarni, Kedar S. Pandya and N.K. Naik. 2014. Stress wave micromacro attenuation in ceramic plates made of tiles during ballistic impact, International Journal of Mechanical Sciences, 83: 3037. http://dx.doi.org/10.1016/j.ijmecsci.2014.03.020 
14 
Naik, N.K., Kedar S. Pandya, Jayaram R. Pothnis and Tamrat Abishu Gelu. 2014. Revisiting Kolsky bar data evaluation method, Composite Structures, 111: 446452 . http://dx.doi.org/10.1016/j.compstruct.2014.01.030 
15 
Naik, N.K, M. Sirisha and A. Inani. 2014. Permeability characterization of polymer matrix composites by RTM / VARTM, Progress in Aerospace Sciences, 65: 2240. http://dx.doi.org/10.1016/j.paerosci.2013.09.002. 
16 
Sathish, S., J. Prasath, K. Satyanarayana Reddy and N.K. Naik. 2013. Damage evolution in delaminated woven fabric Eglass/epoxy composite plates under transverse static patch loading, International Journal of Damage Mechanics, 22 (7): 9821005. DOI: 10.1177/1056789512470387 
17 
Gowtham, H.L., Jayaram R. Pothnis, G. Ravikumar and N.K. Naik. 2013. High strain rate inplane shear behavior of composites, Polymer Testing, 32: 3341341. http://dx.doi.org/10.1016/j.polymertesting.2013.08.008 
18  Pandya K.S., Jayaram R. Pothnis, G. Ravikumar and N.K. Naik. 2013. Ballistic impact behavior of hybrid composites, Materials and Design, 44: 128135. 
19  Ravikumar, G., Jayaram R. Pothnis, M. Joshi, K. Akella, Santosh Kumar and N.K. Naik. 2013. Analytical and experimental studies on mechanical behavior of composites under high strain rate compressive loading, Materials and Design, 44: 246255 
20  Naik, N.K., Santosh Kumar, D. Ratnaveer, M. Joshi and K. Akella. 2013. An energybased model for ballistic impact analysis of ceramiccomposite armors,International Journal of Damage Mechanics, 22 (2):145187. 
21  Jayaprakash, K., Y.M. Desai and N.K. Naik. 2013. Fatigue behavior of [0n/90n]s composite cantilever beam under tip impulse loading, Composite Structures, 99: 255263. 
22  Satapathy, M.R., B.G. Vinayak, K. Jayaprakash and N.K. Naik. 2013. Fatigue behavior of laminated composites with a circular hole under inplane multiaxial loading, Materials and Design, 51: 347356. 
23  Shaktivesh, N.S. Nair, Ch.V. Sesha Kumar and, N.K. Naik. 2013. Ballistic impact performance of composite targets, Materials and Design. 51: 833846. 
24  Pothnis, J.R., G. Ravikumar, M. Joshi, K. Akella, Santosh Kumar and N.K. Naik. 2012. High strain rate compressive behavior of epoxy LY 556: radial constraint effect, Materials Science and Engineering A, 538: 210218. 
25  Krishna Teja Palleti, H.N., S. Gurusamy, Santosh Kumar, R. Soni, B. John, R. Vaidya, A. Bhoge and, N.K. Naik. 2012. Ballistic impact performance of metallic targets, Materials and Design, 39: 253263. 
26  Vinayak, B.G., K. Jayaprakash and N.K. Naik. 2012. Fatigue behavior of laminated composites with a circular hole under inplane uniaxial random loading, Materials and Design, 40: 245256. 
27  Naik, N.K. 2012. Guest Editorial: Special issue on high velocity impact behavior of composites, Journal of Strain Analysis for Engineering Design,47 (7): 395 
28  Udatha, P., Ch. V. Sesha Kumar, N.S. Nair and N.K. Naik. 2012. High velocity impact performance of threedimensional woven composites, Journal of Strain Analysis for Engineering Design, 47 (7): 419431. 
29  Pandya, K.S., K. Akella, M. Joshi and N.K. Naik. 2012. Ballistic impact behavior of carbon nanotube and nanosilica dispersed resin and composites, Journal of Applied Physics, 112: article 113522. 
30  Pandya, K.S., Lokesh Dharmane, Jayaram R. Pothnis, G. Ravikumar and N.K. Naik. 2012. Stress wave attenuation in composites during ballistic impact, Polymer Testing, 31: 261266. 
31  Naik, N.K., Parimi Jaya Shankar, Venkateswara Rao Kavala, G. Ravikumar, Jayaram R. Pothnis and H. Arya. 2011. High strain rate mechanical behavior of epoxy under compressive loading: Experimental and modeling studies, Materials Science and Engineering A, 528: 846854. 
32  Pandya, K.S., Ch. Veeraraju and N.K. Naik. 2011. Hybrid composites made of carbon and glass woven fabrics under quasistatic loading, Materials and Design, 32: 40944099. 
33  Kulkarni, M.D., R. Goel and N.K. Naik. 2011. Effect of back pressure on impact and compressionafterimpact characteristics of composites, Composite Structures, 93: 944951. 
34  Pothnis, Jayaram R., Y. Perla, H. Arya and N.K. Naik. 2011. High strain rate tensile behavior of aluminum alloy 7075 T651 and IS 2062 mild steel, ASME Journal of Engineering Materials and Technology, 133: paper number 021026, pp 19. 
35  Gelu, Tamrat Abishu, S.S. Joshi and N.K. Naik. 2011. Shear properties of acrylic under high strain rate loading, Journal of Applied Polymer Science, 121: 16311639. 
36  Naik, N.K., Ravikumar Gadipatri, N.M. Thoram, Venkateswara Rao Kavala and Ch. Veerraju. 2010. Shear properties of epoxy under high strain rate loading, Polymer Engineering and Science, 50: 780788. 
37  Naik, N.K., P. Yernamma, N.M. Thoram, Ravikumar Gadipatri and Venkateswara Rao Kavala. 2010. High strain rate tensile behavior of woven fabric Eglass/epoxy composite, Polymer Testing, 29: 1422. 
38  Mishra, A. and N.K. Naik. 2010. Failure initiation in composite structures under lowvelocity impact: analytical studies, Composite Structures, 92: 436444. 
39  Naik, N.K., Venkateswara Rao Kavala, Ch. Veerraju and Ravikumar Gadipatri. 2010. Stressstrain behavior of composites under high strain rate compression along thickness direction: effects of loading condition, Materials and Design, 31: 396401. 
40  Naik, N.K., G. Nageswara Rao, Ullas Agarwal, K.A. Raju, Shrinivas A. Pottigar and V. Suresh. 2009. Sandwich structures with composite inserts: experimental studies, Polymer Composites, 30: 639648. 
41  Mishra, Ashish and N.K. Naik. 2009. Inverse micromechanical models for compressive strength of unidirectional composites, Journal of Composite Materials, 43: 11991211. 
42  Naik, N.K., Ch. Veerraju and Venkateswara Rao Kavala. 2008. Hybrid composites under high strain rate compressive loading, Materials Science and Engineering A, 498: 8799. 
43  Naik, N.K., R. Goel and M.D. Kulkarni. 2008. Stress wave attenuation in ceramic plates, Journal of Applied Physics, 103 (10), art. no. 103504. 
44  Naik, N.K. and A.V. Doshi. 2008. Ballistic impact behaviour of thick composites: parametric studies, Composite Structures, 82: 447464. 
45  Naik, N.K. and Venkateswara Rao Kavala. 2008. High strain rate behavior of woven fabric composites under compressive loading, Materials Science and Engineering A, 474: 301311. 
46  Naik, N.K. and Yernamma Perla. 2008. Mechanical behaviour of acrylic under high strain rate tensile loading, Polymer Testing, 27: 504512 
47  Naik, N.K., Addis Asmelash, Venkateswara Rao Kavala and Ch. Veerraju. 2007. Interlaminar shear properties of polymer matrix composites: strain rate effect, Mechanics of Materials, 39: 10431052. 
48  Naik, N.K., D. Sitpal, Venkateswara Rao Kavala and Addis Asmelash. 2007. Compressive split Hopkinson pressure bar apparatus: part I  design and development, Journal of Aerospace Sciences and Technologies, 59: 7786. 
49  Naik, N.K., Venkateswara Rao Kavala and Addis Asmelash. 2007. Compressive split Hopkinson pressure bar apparatus: part II  experimental results, Journal of Aerospace Sciences and Technologies, 59: 87101 
50  Naik, N.K., P. Shrirao and B.C.K. Reddy. 2006. Ballistic impact behaviour of woven fabric composites: formulation, International Journal of Impact Engineering, 32: 15211552 
51  Naik, N.K., P. Shrirao and B.C.K. Reddy. 2005. Ballistic impact behaviour of woven fabric composites: parametric studies, Materials Science & Engineering A, 412: 104116. 
52  Naik, N.K. and A.V. Doshi. 2005. Ballistic impact behavior of thick composites: analytical formulation, AIAA Journal, 43:15251536. 
53  Naik, N.K. and P. Shrirao. 2004. Composite structures under ballistic impact, Composite Structures, 66:579590. 
54  Naik, N.K., M.N. Joglekar, H. Arya, S.V. Borade and K.N. Ramakrishna. 2004. Impact and compression after impact characteristics of plain weave fabric composites: effect of plate thickness, Advanced Composite Materials, 12: 261280. 
55  Shimpi, R.P., H. Arya and N.K. Naik. 2003. A higher order displacement model for plate analysis, Journal of Reinforced Plastics and Composites, 22:16671688. 
56  Naik, N.K., S.I. Tiwari and R.S. Kumar. 2003. An analytical model for compressive strength of plain weave fabric composites, Composites Science and Technology, 63:609625. 
57  Naik, N.K., K. Satyanarayana Reddy and N. Bulli Raju. 2003. Damage evolution in woven fabric composites: transverse static loading, Journal of Composite Materials, 37:2134. 
58  Naik, N.K., Sk.N.M. Azad and P. Durga Prasad. 2002. Stress and failure analysis of 3D angle interlock woven composites, Journal of Composite Materials, 36:93123. 
59  Naik, N.K. and K. Satyanarayana Reddy. 2002. Delaminated woven fabric composite plates under transverse quasistatic loading: experimental studies, Journal of Reinforced Plastics and Composites, 21:869877. 
60  Naik, N.K., K.S. Reddy, S. Meduri, N.B. Raju, P.D. Prasad, Sk.N.M. Azad, P.A. Ogde and B.C.K. Reddy. 2002. lnterlaminar fracture characterization for plain weave fabric composites, Journal of Materials Science, 37:29832987. 
61  Naik, N.K. and E. Sridevi. 2002. An analytical method for thermoelastic analysis of 3D orthogonal interlock woven composites, Journal of Reinforced Plastics and Composites, 21:11491191. 
62  Naik, N.K. and Ramakrishna Kuchibhotla. 2002. Analytical study of strength and failure behaviour of plain weave fabric composites made of twisted yarns, Composites  Part A : Applied Science and Manufacturing, 33A:697708. 
63  Naik, N.K., S.V. Borade, H. Arya, M. Sailendra and S.V. Prabhu. 2002. Experimental studies on impact behaviour of woven fabric composites: effect of impact parameters, Journal of Reinforced Plastics and Composites, 21:13471362. 
64  Arya, H., R.P. Shimpi and N.K. Naik. 2002. A zigzag model for laminated composite beams, Composite Structures, 56: 2124. 
65  Arya, H., R.P. Shimpi and N.K. Naik. 2002. A zigzag model for laminated composite plates, Journal of the Aeronautical Society of India, 54:347357. 
66  Arya, H., R.P. Shimpi and N.K. Naik. 2002. Layerbylayer analysis of a simply supported thick flexible sandwich beam, AIAA Journal, 40:21332136. 
67  Naik, N.K. and M.N. Singh. 2001. Twisted impregnated yarns: shear strength, The Journal of The Textile Institute, Part 1, 92:164183. 
68  Naik, N.K., Sailendra Meduri and Y. Chandrasekher. 2001. Polymer matrix woven fabric composites subjected to low velocity impact: part Ill  effect of incident impact velocity and impactor mass, Journal of Reinforced Plastics and Composites, 20:720743. 
69  Naik, N.K. and Bulliraju Nemani. 2001. Initiation of damage in composite plates under transverse central static loading, Composite Structures, 52:167172. 
70  Naik, N.K. and R. Ramasimha. 2001. Estimation of compressive strength of delaminated composites, Composite Structures, 52:199204. 
71  Naik, N.K. and M.N. Singh. 2001. Twisted impregnated yarns: transverse tensile strength, The Journal of Strain Analysis for Engineering Design, 36:347358. 
72  Naik, N.K., lshe Mudzingwa and M.N. Singh. 2001. Effect of twisting on tensile failure of impregnated yarns with broken filaments, Journal of Composites Technology & Research, 23:225234. 
73  Naik, N.K. and Sailendra Meduri. 2001. Polymermatrix composites subjected to lowvelocity impact: effect of laminate configuration, Composites Science and Technology, 61:14291436. 
74  Naik, N.K., R. Ramasimha, H. Arya, S.V. Prabhu and N. Shama Rao. 2001. Impact response and damage tolerance characteristics of glasscarbon/epoxy hybrid composite plates, Composites  Part B: Engineering, 32B:565574. 
75  Naik, N.K., Sk.N.M. Azad, P. Durga Prasad and B.J. Thuruthimattam. 2001. Stress and failure analysis of 3D orthogonal interlock woven composites, Journal of Reinforced Plastics and Composites, 20:14851523. 
76  Naik, N.K. and Sailendra Meduri. 2000. Polymer matrix composites subjected to low velocity impact: effect of fibre ume fraction, Science and Engineering of Composite Materials, 9:207217. 
77  Naik, N.K. and V. Madhavan. 2000. Twisted impregnated yarns: elastic properties, The Journal of Strain Analysis for Engineering Design, 35:8391. 
78  Naik, N.K., Y. Chandrasekher and S. Meduri. 2000. Damage in woven fabric composites subjected to low velocity impact, Composites Science and Technology, 60:731744. 
79  Naik, N.K., Y. Chandrasekher and S. Meduri. 2000. Polymer matrix woven fabric composites subjected to low velocity impact: part I, damage initiation studies, Journal of Reinforced Plastics and Composites, 19:912954. 
80  Naik, N.K., S. Meduri and Y. Chandrasekher. 2000. Polymer matrix woven fabric composites subjected to low velocity impact: part II, effect of plate thickness, Journal of Reinforced Plastics and Composites, 19:10311055. 
81  Subramaniam, E., B. Roy and N.K. Naik. 2000. Study of bird impact on composite axial fan rotor blades, Journal of the Aeronautical Society of India, 52:112120. 
82  Mathew, J., N. Ramakrishnan and N.K. Naik. 1999. Trepanning on unidirectional composites: delamination studies, Composites  Part A: Applied Science and Manufacturing, 30A:951959. 
83  Mathew, J., G.L. Goswami, N. Ramakrishnan and N.K. Naik. 1999. Parametric studies on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites, Journal of Materials Processing Technology, 8990:198203. 
84  Naik, N.K. and B.J. Thuruthimattam. 1999. Behavior of 30 orthogonally woven composites under tensile loading, Journal of Composites Technology & Research, 21:153163. 
85  Mathew, J., N. Ramakrishnan and N.K. Naik. 1999. Investigations into the effect of geometry of a trepanning tool on thrust and torque during drilling of GFRP composites, Journal of Materials Processing Technology, 91:111. 
86  Naik, N.K. and R.S. Kumar. 1999. Compressive strength of unidirectional composites: evaluation and comparison of prediction models, Composite Structures, 46:299308. 
87  Naik, N.K. and Y. Chandrasekher. 1998. Damage in laminated composites due to low velocity impact, Journal of Reinforced Plastics and Composites, 17:12321263. 
88  Naik, N.K. and V.K. Ganesh. 1997. Thermomechanical behaviour of plain weave fabric composites: experimental investigations, Journal of Materials Science, 32:267277. 
89  Ganesh, V.K. and N.K. Naik. 1997. (+/45) degree offaxis tension test for shear characterization of plain weave fabric composites, Journal of Composites Technology & Research, 19:7785. 
90  Ganesh, V.K., S. Ramakrishna, S.H. Teoh and N.K. Naik. 1997. Microstructural design of textile composites, Materials & Design, 18:175181. 
91  Ganesh, V.K. and N.K. Naik. 1996. Failure behavior of plain weave fabric laminates under onaxis uniaxial tensile loading: I  laminate geometry, Journal of Composite Materials, 30:17481778. 
92  Naik, N.K. and V.K. Ganesh. 1996. Failure behavior of plain weave fabric laminates under onaxis uniaxial tensile loading: II  analytical predictions, Journal of Composite Materials, 30:17791822. 
93  Ganesh, V.K. and N.K. Naik. 1996. Failure behavior of plain weave fabric laminates under onaxis uniaxial tensile loading: Ill  effect of fabric geometry, Journal of Composite Materials, 30:18231856. 
94  Ganesh, V.K. and N.K. Naik. 1995. Failure behaviour of plain weave fabric laminates under inplane shear loading: effect of fabric geometry, Composite Structures, 30:179192 
95  Naik, N.K. and V.K. Ganesh. 1995. An analytical method for plain weave fabric composites, Composites, 26:281289. 
96  Bhatnagar, N., N. Ramakrishnan, N.K. Naik and R. Komanduri. 1995. On the machining of fiber reinforced plastic (FRP. composite laminates, International Journal of Machine Tools and Manufacture, 35:701716. 
97  Naik, N.K. and V.K. Ganesh. 1994. Failure behavior of plain weave fabric laminates under inplane shear loading, Journal of Composites Technology & Research, 16:320. 
98  Ganesh, V.K. and N.K. Naik. 1994. Thermal expansion coefficients of plain weave fabric laminates, Composites Science and Technology, 51:387408. 
99  Shembekar, P.S. and N.K. Naik. 1993. Elastic analysis of woven fabric laminates: part I. offaxis loading, Journal of Composites Technology & Research, 15:2333. 
100  Naik, N.K. and P.S. Shembekar. 1993. Elastic analysis of woven fabric laminates: part II. mixed composites, Journal of Composites Technology & Research, 15:3437. 
101  Ganesh, V.K. and N.K. Naik. 1993. Some strength studies on FRP laminates, Composite Structures, 24:5158. 
102  Naik, N.K. and V.K. Ganesh. 1993. Optimum design studies on FRP beams with holes, Composite Structures, 24:5966. 
103  Naik, N.K. and V.K. Ganesh. 1993. Prediction of thermal expansion coefficients of plain weave fabric composites, Composite Structures, 26:139154 
104  Bhatnagar, N., N.K. Naik and N. Ramakrishnan. 1993. Experimental investigations of drilling on CFRP composites, Materials and Manufacturing Processes, 8:683701. 
105  Shah, M.S., P.S. Shembekar and N.K. Naik. 1993. Prediction of notched strength of composites using damage zone model, Journal of the Institution of Engineers (India), Aerospace Engineering Division, 73:5055. 
106  Naik, N.K. and P.S. Shembekar. 1992. Notched strength of fabric laminates. I: prediction, Composites Science and Technology, 44:112. 
107  Shembekar, P.S. and N.K. Naik. 1992. Notched strength of fabric laminates. II: effect of stacking sequence, Composites Science and Technology, 44:1320. 
108  Naik, N.K. and V.K. Ganesh. 1992. Prediction of onaxes elastic properties of plain weave fabric composites, Composites Science and Technology, 45:135152. 
109  Naik, N.K. and P.S. Shembekar. 1992. Elastic behavior of woven fabric composites: I  lamina analysis, Journal of Composite Materials, 26:21962225. 
110  Shembekar, P.S. and N.K. Naik. 1992. Elastic behavior of woven fabric composites: II  laminate analysis, Journal of Composite Materials, 26:22262246. 
111  Naik, N.K. and P.S. Shembekar. 1992. Elastic behavior of woven fabric composites: Ill laminate design, Journal of Composite Materials, 26:25222541. 
112  Biswas, K. and N.K. Naik. 1992. Optimization of hole shape in an orthotropic plate under uniaxial load by minimization of strain energy density, Journal of the Institution of Engineers (India), Aerospace Engineering Division, 72:4043. 
113  Arya, H., N.K. Naik and B. Roy. 1991. Axial flow fan blades of fibre reinforced plastics: tooling details, Journal of the Institution of Engineers (India), Aerospace Engineering Division, 72:1823. 
114  Naik, N.K., P.S. Shembekar and M.V. Hosur. 1991. Failure behavior of woven fabric composites, Journal of Composites Technology & Research, 13:107116. 
115  Naik, N.K., R. Anbarasu and V.K. Ganesh. 1991. Effect of curing stresses on the behaviour of fibre reinforced plastic composites under biaxial loading, Journal of Materials Science, 26:57535761. 
116  Naik, N.K., P.S. Shembekar and M.K. Verma. 1990. On the influence of stacking sequence on notch sensitivity of fabric laminates, Journal of Composite Materials, 24:838852. 
117  Naik, N.K. 1988. Two neighbouring quasitrapezoidal holes in discs with minimum s.c.f., Strain, 24:5155. 
118  Naik, N.K. 1988. Photoelastic investigation of finite plates with multiholes, Mechanics Research Communications, 15:141146. 
119  Naik, N.K., R. Ramesh Kumar and K. Rajaiah. 1986. Optimum hole shapes in beams under pure bending, ASCE Journal of Engineering Mechanics, 112:407411. 
120  Naik, N.K. and K. Rajaiah. 1985. Effect of change of load direction on SCF for optimized quasisquare hole in isotropic plates, Journal of Ship Research, 29:206208. 
121  Rajaiah, K. and N.K. Naik. 1984. Hole shape optimisation in circular discs with two neighbouring holes, Strain, 20:1519. 
122  Naik, N.K. and K. Rajaiah. 1984. Minimum SCF for two neighbouring holes in disks by photoelasticity, ASCE Journal of Engineering Mechanics, 110:654659. 
123  Rajaiah, K. and N.K. Naik. 1984. Holeshape optimization in a finite plate in the presence of auxiliary holes, Experimental Mechanics, 24:157161. 
124  Naik, N.K. and K. Rajaiah. 1984. Quasisquare holes with maximum failure strength in orthotropic plates, Composites, 15:310312. 
125  Rajaiah, K., N. Ramaswamy, N.K. Naik, V.P. Sunder Singh, S. Suryanarayan and C.P. Jain. 1984. Design and development of pultrusion process with induction and dielectric heating for FRP composite manufacture, Transactions of the Indian Institute of Metals, 37:116125. 
126  Rajaiah, K. and N.K. Naik. 1984. An analytical approach for the optimization of hole shapes in CFRP orthotropic composite plates, The Journal of the Aeronautical Society of India, 36:115120. 
127  Naik, N.K. and K. Rajaiah. 1984. Effect of load tilt angle on SCF for optimized quasisquare holes in orthotropic plates, Fibre Science and Technology, 21:255262. 
128  Rajaiah, K. and N.K. Naik. 1983. Quasirectangular holes with minimum stress concentration in orthotropic plates, Journal of Reinforced Plastics and Composites, 2:164177 (Also) 3, No 1, p 96,1984.. 
129  Rajaiah, K. and N.K. Naik. 1983. Optimum quasirectangular holes in infinite orthotropic plates under inplane loading, ASME Journal of Applied Mechanics, 50:891892. 
130  Rajaiah, K. and N.K. Naik. 1982. Optimum hole shape determination in infinite orthotropic plates under inplane loading by conformal transformation, Mechanics Research Communications, 9:179185. 
131  Rajaiah, K. and N.K. Naik. 1982, “Discussion on ‘Optimization in a Class of Hole Shapes in Plate Structures’ by S.K. Dhir and published in the December 1981 issue of the ASME Journal of Applied Mechanics, 48, No 4, pp 905908,” ASME Journal of Applied Mechanics, 49:927928. 
132  Naik, N.K. 1979. Development of aircraft production engineering discipline at lIT Bombay, The Journal of the Aeronautical Society of India, 31:119125. 
REFEREED CONFERENCE PROCEEDINGS PAPERS 

133 
Phadnis Vaibhav A., Kedar S. Pandya, Niranjan K. Naik, Anish Roy and Vadim V. Silberschmidt. 2015. Ballistic damage in hybrid composite laminates, Journal of Physics: Conference Series, IOP Publishing, Vol. 628, article 012092. DOI: 10.1088/17426596/628/1/012092 
134 
Phadnis Vaibhav A., Kedar S. Pandya, Niranjan K. Naik, Anish Roy and Vadim V. Silberschmidt. 2013. Ballistic impact behaviour of woven fabric composite: Finite element analysis and experiments. Journal of Physics: Conference Series, IOP Publishing, Vol. 451, article 012019. DOI:10.1088/17426596/451/1/012019. 
135  Pandya, K.S. and N.K. Naik. 2013. Ballistic impact behavior of carbon nanotube dispersed epoxy resin: Parametric studies. Proceedings of the 19th International Conference on Composite Materials, eds. Hoa, S.V. and Pascal Hubert, Curran Associates, Inc., New York, pp. 84858495. 
136  Naik, N.K. and Ch. Veera Sesha Kumar. 2011. Ballistic impact behavior of foam core sandwich structures: Formulation, Proceedings of International Conference on Composites: Current & Future Trends (on Pendrive), eds, B. Dattaguru et al, IISc Bangalore, pp 298305 
137  Pothnis, Jayaram R., G. Ravikumar and N.K. Naik. 2009. High strain rate compressive behavior of composites: Radial constraint effect, in the Proceedings of the ISAMPE National Conference on Composites: INCCOM8 on Emerging Trends In Composites: Materials and Technology, eds, B.C. Pai et al, Indian Society for Advancement of Materials and Process Engineering (ISAMPE), Thiruvananthapuram Chapter, pp 319324. 
138  Ravikumar, G., Jayaram R. Pothnis and N.K. Naik. 2009. High strain rate shear characterization of composites, in the Proceedings of the ISAMPE National Conference on Composites: INCCOM8 on Emerging Trends In Composites: Materials and Technology, eds, B.C. Pai et al, Indian Society for Advancement of Materials and Process Engineering (ISAMPE), Thiruvananthapuram Chapter, pp 325331. 
139  Shinde, Hanmant, Ravikanth Aluri, Manoj Bhanage, Nitinkumar Anekar, Y.M. Desai and N.K. Naik. 2009. Residual life prediction for quasiisotropic laminates using fracture mechanics approach: Inplane biaxial loading, Proceedings of XVI NASAS (on CD), eds, A. Joshi et al, IIT Bombay, pp 111. 
140  Chandekar, Hari U., Nilesh Sonawane, Swapnil Govind, Pravin Nalawade, Hanmant Shinde, Y.M. Desai and N.K. Naik. 2009. Residual life prediction in polymer matrix composites using stresslife approach: Inplane multiaxial loading, Proceedings of XVI NASAS (on CD), eds, A. Joshi et al, IIT Bombay, pp 18. 
141  Parab, N.D., Ankit Verma and N.K. Naik. 2008. Ballistic impact behavior of foam core sandwich structures, in the Proceedings of the ISAMPE National Conference on Composites: INCCOM7 on Composite Materials and Processes for the Future (on CD), eds, R.M.V.G.K. Rao et al, Indian Society for Advancement of Materials and Process Engineering (ISAMPE), Bangalore Chapter, pp 158163. 
142  Rajhansa Sridhara, Rishi Agrawal, Ankur Baranwal, Hanmant Shinde, Ravikanth Aluri, Y.M. Desai and N.K. Naik. 2008. Behaviour of crossply laminates under general inplane fatigue loading, in the Proceedings of the ISAMPE National Conference on Composites: INCCOM7 on Composite Materials and Processes for the Future (on CD), eds, R.M.V.G.K. Rao et al, Indian Society for Advancement of Materials and Process Engineering (ISAMPE), Bangalore Chapter, pp 393399. 
143  Ankit Verma, N.D. Parab and N.K. Naik. 2008. Ballistic impact behavior of Eglass reinforced composites made using carbonnanotubedispersed epoxy, in the Proceedings of the ISAMPE National Conference on Composites: INCCOM7 on Composite Materials and Processes for the Future (on CD), eds, R.M.V.G.K. Rao et al, Indian Society for Advancement of Materials and Process Engineering (ISAMPE), Bangalore Chapter, pp 484489. 
144  Naik, N.K. 2008. Ballistic impact behavior of polymer matrix composites, in the Proceedings of the International Conference on Aerospace Science and Technology (INCAST2008) (on CD), NAL, Bangalore, Paper IT26, pp 14. 
145  Goel, R., M.D. Kulkarni and N.K. Naik. 2007. Stress wave attenuation during ballistic impact on a ceramic target, in the Proceedings of the Sixteenth International Conference on Composite Materials (ICCM16) (on CD), eds, Kazuro Kageyama et al, Kyoto, Japan, Paper ThHA203, pp 19, Extended Abstracts, pp 986987. 
146  Naik, N.K. 2007. High strain rate behavior of composites, in Experimental Techniques in Structural Engineering, Proceedings of the XV National Seminar on Aerospace Structures (NASASXV), eds, B. Dattaguru et al, Park College of Engineering and Technology, Coimbatore, Plenary Session, pp 1726. 
147  Mishra, A. and N.K. Naik. 2007. Evaluation of compressive strength of unidirectional composites using inverse micromechanics, in the Proceedings of International and INCCOM6 Conference on Future Trends in Composite Materials (on CD), eds, K.K. Kamal et al, IIT Kanpur, Paper 164, pp 918924. 
148  Verma, M., S. Gurusamy, R. Arun Shourie, D. Arun and N.K. Naik. 2007. Stressstrain behaviour of edge delaminated composites, in the Proceedings of International and INCCOM6 Conference on Future Trends in Composite Materials (on CD), eds, K.K. Kamal et al, IIT Kanpur, Paper 168, pp 939941. 
149  Kulkarni, M.D., R. Goel and N.K. Naik. 2007. Effect of back pressure on impact behavior of composites, in the Proceedings of Fourth International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM2007) (on CD), eds, S.K. Bhattacharyya et al, IIT Kharagpur, Paper 72, pp 112, Extended Abstracts of Proceedings, pp 181183. 
150  Junankar, A.S., R.V. Kulkarni, Y.M. Desai and N.K. Naik. 2007. Inverse micromechanics for the prediction of thermomechanical properties of 3D orthotropic composites, in the Proceedings of Fourth International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM2007) (on CD), eds, S.K. Bhattacharyya et al, IIT Kharagpur, Paper 224, pp 112, Extended Abstracts of Proceedings, pp 526528. 
151  Joglekar, M.N. and N.K. Naik. 2006. Bevavior of polymer matrix laminated composites under thermal cyclic loading, in Fatigue, Fracture & Ageing Structures, Proceedings of XIV NASAS, eds, C.M. Manjunatha et al, VNIT Nagpur, pp 343347. 
152  Rajeev Kumar and N.K. Naik. 2006. Fatigue behavior of laminated composites under general inplane loading, in Fatigue, Fracture & Ageing Structures, Proceedings of XIV NASAS, eds, C.M. Manjunatha et al, VNIT Nagpur, pp 348352. 
153  Meena, Niranjan and N.K. Naik. 2006. Fatigue failure criterion for polymer matrix composites: lamina to laminate, in Fatigue, Fracture & Ageing Structures, Proceedings of XIV NASAS, eds, C.M. Manjunatha et al, VNIT Nagpur, pp 353359. 
154  Naik, N.K. and Ratnaveer. 2005. Ballistic impact behavior of ceramiccomposite armors, in the Proceedings of the International Conference on Computational & Experimental Engineering and Sciences (ICCES 05) (on CD), eds, S.M. Sivakumar et al, Tech Science Press, Forsyth, USA, Paper 612, pp 28392844. 
155  Asmelash, Addis and N.K. Naik. 2005. Interlaminar shear properties of plain weave Eglass / epoxy and twill weave carbon / epoxy under high strain rate loading: effect of strain rate, in the Proceedings of the International Conference on Computational & Experimental Engineering and Sciences (ICCES 05) (on CD), eds, S.M. Sivakumar et al, Tech Science Press, Forsyth, USA, Paper 634, pp 29572962. 
156  Venkateswara Rao, K., Addis Asmelash and N.K. Naik. 2005. Effect of strain rate on compressive properties of composites: experimental and analytical studies, in the Proceedings of the International Conference on Computational & Experimental Engineering and Sciences (ICCES 05) (on CD), eds, S.M. Sivakumar et al, Tech Science Press, Forsyth, USA, Paper 661, pp 31113116. 
157  Nageswara Rao, G., UIlas Agrawal and N.K. Naik. 2005. Sandwich structures with composite inserts : experimental studies, in Sandwich Structures 7: Advancing with Sandwich Structures and Materials, in the Proceedings of the 7th International Conference on Sandwich Structures (ICSS7), eds, O.T. Thomsen, E. Bozhevolnaya and A. Lyckegaard, Springer, pp 9971006. 
158  Naik, N.K. and Addis Asmelash. 2005. Effect of strain rate on shear behavior of composites, in the Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics (on CD), The Society for Experimental Mechanics, Inc. (SEM), Bethel, USA, Paper 393, pp 16, Abstracts, p 103. 
159  Naik, N.K., Addis Asmelash and D. Sitpal. 2005. Mechanical behavior of composites under high strain rate loading, in the Proceedings of the Tenth IndiaJapan Joint Seminar on Manufacturing Science of Advanced Composite Materials, ed, A. Ghosh, lIT, Kanpur, pp 1120. 
160  Naik, N.K. and Addis Asmelash. 2004. Mechanical behavior of composites at high strain rate shear loading: review, in the Proceedings of the Third International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM2004) (on CD), eds, S.K. Bhattacharyya and S. Ghosh, lIT Kharagpur, Paper 165, pp 111, Extended Abstracts of Proceedings, pp 302304. 
161  Naik, N.K. and A. Warman. 2004. Stress wave attenuation in woven fabric composites during ballistic impact, in the Proceedings of the Third ISAMPE National Conference on Composites (INCCOM3), Indian Society for Advancement of Materials and Process Engineering, R&D E (E), Pune, pp 2734. 
162  Naik, N.K. and A.V. Doshi. 2004. Ballistic impact behavior of thick composites, in the Proceedings of International Conference on Advances in Structural Integrity 2004 (ICASI2004) and XIII NASAS (on CD), eds, P.D. Mangalgiri et al, IISc Bangalore, paper ICASI/CMC24, pp 16. 
163  Naik, N.K. and M. Sirisha. 2004. Permeability characterization and processing of polymer matrix composites by VARTM, in the Proceedings of the Ninth JapanIndia Joint Seminar on Manufacturing Science of Advanced Composite Materials, ed, T. Machida, Tamagawa University, Tokyo, pp 137146. 
164  Naik, N.K., P. Shrirao, B.C.K. Reddy and A. Warman. 2003. Ballistic impact behavior of polymer matrix composites, in the Proceedings of INCCOM2 and XII NASAS, eds, R. Balasubramanim et aI, Invited Lecture, pp 114. 
165  Naik, N.K., B. Chaitanya Kumar Reddy and K. Rahul. 2002. Ballistic impact of composites: a review, in the Proceedings of Xl National Seminar on Aerospace Structures (NASASXI), eds, R. Balasubramaniam et al, Allied Publishers Pvt. Ltd., New Delhi, pp 399404. 
166  Warman, A., N. Vikas Kumar and N.K. Naik. 2002. Mechanical characterization of pultruded rods: effect of process parameters, in the Proceedings of Xl National Seminar on Aerospace Structures (NASASXI), eds, R. Balasubramaniam et aI, Allied Publishers Pvt. Ltd., New Delhi, pp 440446. 
167  Ogde, P. and N.K. Naik. 2002. Thermomechanical analysis of threedimensional 5axes braided composites, in New Frontiers in Materials and Processing, Proceedings of ISAMPE National Conference, eds, T.C. Koshy et al, VSSC, Thiruvananthapuram, pp 210219. 
168  Naik, N.K., B.C.K. Reddy and Piyush Shrirao. 2002. Analytical modeling of ballistic impact behavior of woven fabric composites, in the Proceedings of TEXCOMP 6 (on CD), ed, F.K. Ko, Drexel University, Paper 6.08, pp 14. 
169  Naik, N.K. 2002. Ballistic impact behavior of composites: effect of reinforcement architecture, in the Proceedings of the Eighth IndiaJapan Joint Seminar on Manufacturing Science of Advanced Composite Materials, ed, A. Ghosh, lIT, Kanpur, pp 917. 
170  Naik, N.K. 2001. Threedimensional fiveaxes braided composites: jamming condition and mechanical performance, in the Proceedings of the Seventh JapanIndia Joint Seminar on Manufacturing Science of Advanced Composite Materials, ed, T. Machida, Tamagawa University, Tokyo, pp 1122. 
171  Durga Prasad, P. and N.K. Naik. 2000. Bending stiffness and damage studies on quasiisotropic laminated composite plates, in Advances in Structural Engineering, Proceedings of the Second Structural Engineering Convention (SEC2000), eds, Y.M. Desai et aI, Quest Publications, Mumbai, pp 3540. 
172  Meduri, S., N. Bulli Raju, N.K. Naik and D.K. Mahanty. 2000. Textile composites in structural applications: impact damage initiation studies, in Advances in Structural Engineering, Proceedings of the Second Structural Engineering Convention (SEC2000), eds, Y.M. Desai et aI, Quest Publications, Mumbai, pp 6369. 
173  Naik, N.K. 2000. Textile structural composites: technology and performance, in the Proceedings of the Sixth IndiaJapan Joint Seminar on Manufacturing Science of Advanced Composite Materials, ed, A. Ghosh, lIT, Kharagpur, pp 1926. 
174  Naik, N.K. and S.l. Tiwari. 2000. Thick curved beams on elastic foundation: higher order theory, in the Proceedings of the SEM 9th International Congress on Experimental Mechanics (ICEM9), Society for Experimental Mechanics, Inc., Bethel, pp 167170 
175  Naik, N.K. and R. Ramasimha. 2000. Impact response of hybrid glasscarbon/epoxy composite plates, in the Proceedings of the SEM 9th International Congress on Experimental Mechanics (ICEM9), Society for Experimental Mechanics, Inc., Bethel, pp 198201. 
176  Naik, N.K. and S.V. Borade. 2000. Impact behavior of woven fabric composites: experimental studies, in the Proceedings of the SEM 9th International Congress on Experimental Mechanics (ICEM9), Society for Experimental Mechanics, Inc., Bethel, pp 750753. 
177  Naik, N.K., N. Bulli Raju, P. Durga Prasad, S. Meduri, Sk.N.M. Azad, K. Satyanarayan Reddy and P.A. Ogde. 2000. Interlaminar fracture characterization: effect of woven fabric geometry, in the Proceedings of the SEM 9th International Congress on Experimental Mechanics (ICEM9), Society for Experimental Mechanics, Inc., Bethel, pp 754757. 
178  Naik, N.K., and N. Bulli Raju. 2000. Woven fabric composites under transverse quasistatic loading: delamination propagation studies, in the Proceedings of the 7th International Conference on Composites Engineering (ICCE/7), ed, D. Hui, ICCE, New Orleans, pp 637638. 
179  Roy, B., N.K. Naik and E. Subramaniam. 2000. Study of bird impact damages to composite blades and guide vanes, in the Proceedings of the Third AsianPacific Conference on Aerospace Technology and Science (APCATS), eds, G. Yaonam and L. Peiging, Beijing University of Aeronautics and Astronautics, China, pp 414423. 
180  Naik, N.K. 2000. Impact behavior of high performance polymer matrix composites, in the Proceedings of the lndoGerman Workshop on High Temperature Fibre Composite Materials, ed, V.K. Srivastava, Allied Publishers Limited, New Delhi, pp 2034. 
181  Naik, N.K. and V.K. Ganesh. 2000. Onaxes inplane shear strength of plain weave fabric composites, in Composites: Science and Technology, eds, R.C. Prasad and P. Ramakrishnan, New Age International (P) Limited Publishers, New Delhi, Chapter 11, pp 134140. 
182  Madhavan, V. and N.K. Naik. 1999. Elastic behavior of twisted impregnated yarns, in the Proceedings of the 1999 AIAAIASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Volume 1, AIAA921298, pp 936944. 
183  Naik, N.K. 1998. Woven fabric composites: process parameters, in the Proceedings of the Fourth IndiaJapan Joint Seminar on Manufacturing Science of Advanced Composites, ed, N.G. Nair, lIT Madras, pp 4350. 
184  Thuruthimattam, B.J. and N.K. Naik. 1998. Mechanical characterization of hybridized 3D orthogonally woven composites, in the Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Part 2, AIAA981809, pp 953961. 
185  Naik, N.K., Y. Chandrasekher and S. Meduri. 1998. Polymer matrix composites subjected to low velocity impact: damage initiation studies, in Nonlinear Mechanics, NASAS8 Proceedings, eds, V. Kalyanaraman and P. Sriram, Allied Publishers Limited, New Delhi, pp 308315. 
186  Naik, N.K. 1998. Effect of weave parameters on impact behavior of composites, in the Proceedings of the Fifth JapanIndia Joint Seminar on Manufacturing Science of Advanced Composite Materials, ed, T. Machida, Tamagawa University, Tokyo, pp 512. 
187  Ghosh Swati, J. Mathew, P.C. Bhatt, N. Ramakrishnan, N.K. Naik and G.L. Goswami. 1997. Parametric studies on cutting of AFRP composites using Nd:YAG laser, in Laser Applications in Materials Science and Industry, Proceedings of the Symposium on Laser Applications in Materials Science and Industry, eds, R. Kesavamoorthy et al, Allied Publishers Limited, New Delhi, pp 187192. 
188  Naik, N.K. and V.K. Ganesh. 1996. (+/ 45) degree offaxis tension test for shear characterization of plain weave fabric composites, in Advances in Testing, Design and Development of Aerospace Structures, NASAS5 Proceedings, eds, P.M. Mujumdar and A. Joshi, Allied Publishers Limited, New Delhi, pp 7180. 
189  Mathew, J., N. Ramakrishnan and N.K. Naik. 1996. Drilling of UD composites with trepanning tools: preliminary investigations, in Advances in Testing, Design and Development of Aerospace Structures, NASAS5 Proceedings, eds, P. M. Mujumdar and A. Joshi, Allied Publishers Limited, New Delhi, pp 247252. 
190  Kumar, R.S. and N.K. Naik. 1995. Prediction of compressive strength of plain weave fabric composites, in the Proceedings of the Tenth International Conference on Composite Materials (ICCM10), eds, A. Poursartip and K. Street, Woodhead Publishing Limited, CambridgeEngland, Volume IV, pp IV 333 IV 340. 
191  Naik, N.K. and V.K. Ganesh. 1995. Damage mechanism in satin weave fabric composites, in the Proceedings of the 2nd International Conference on Composites Engineering (ICCE/2), ed, D. Hui, ICCE, New Orleans, pp 533534. 
192  Naik, N.K. and V.K. Ganesh. 1994. Damage mechanism in woven fabric composites, in Fracture Mechanics, Proceedings of the IndoGerman Workshop94, eds, A.V. Krishna Murthy and F.G. Buchholz, Interline Publishing, Bangalore, pp 8793. 
193  Bhatnagar, N., N. Ramakrishnan and N.K. Naik. 1994. Some studies on an inverted cone drill for FRP drilling, in Integrated Design and Manufacturing of Composites, ASME1994, Proceedings of the 1994 Engineering Systems Design and Analysis (ESDA) Conference, PD Volume 642, Volume 2, eds, F. Veniali et al, The American Society of Mechanical Engineers, New York, pp 17. 
194  Bhatnagar, N., N. Ramakrishnan and N.K. Naik. 1994. Experimental investigations on tool tip temperature during drilling of FRP composites, in Integrated Design and Manufacturing of Composites, ASME1994, Proceedings of the 1994 Engineering Systems Design and Analysis (ESDA) Conference, PD Volume 642, Volume 2, eds, F. Veniali et al, The American Society of Mechanical Engineers, New York, pp 1925. 
195  Arya, H., S.V. Prabhu and N.K. Naik. 1994. Impact behavior of hybrid composites, in the Proceedings of National Symposium on Developments in Advanced Composites & Structures (NSDACS94), Defence Research & Development Laboratory, Hyderabad, pp 269276. 
196  Naik, N.K. and V.K. Ganesh. 1994. Failure behavior of satin weave fabric composites under onaxis uniaxial tensile loading, in Computational Structural Mechanics, NASAS94 Proceedings, eds, P.K. Sinha and S. Parthan, Allied Publishers Limited, New Delhi, pp 494502. 
197  Naik, N.K. and P.S. Shembekar. 1993. Elastic analysis of satin weave fabric composites, in Advances in Materials and Processes, ICAMPS92 Proceedings, ASM International, ed, P. Ramakrishnan, Oxford & IBH Publishing Co. Pvt. Ltd., New Delhi, pp 180189. 
198  Naik, N.K., B. Roy and H. Arya. 1993. Axial flow fans of fiber reinforced plastics: nearnet shape manufacturing, in Advances in Materials and Processes, ICAMPS92 Proceedings, ASM International, ed, P. Ramakrishnan, Oxford & IBH Publishing Co. Pvt. Ltd., New Delhi, pp 319330. 
199  Naik, N.K. and V.K. Ganesh. 1993. Compact plain weave fabric laminates, in the Proceedings of the 6th JapanUS Conference on Composite Materials92 (6th JUSCCM92), eds, K.L. Reifsnider and M.W. Hyer, Technomic Publishing Company, Inc., Lancaster, pp 855863 
200  Ramakrishnaiah, K.N. and N.K. Naik. 1993. Impact response of polymer matrix woven fabric composites, in Emerging Trends in Mechanical Engineering, 8th ISME Conference Proceedings, eds, R.S. Agarwal et aI, Tata McGrawHill Publishing Company Limited, New Delhi, pp 319324. 
201  Ramakrishnaiah, K.N., H. Arya and N.K. Naik. 1993. Effect of fabric geometry on damage resistance of woven fabric composites, in Developments in the Science and Technology of Composite Materials, ECCM6 Proceedings, eds, A.R. Bunsell et al, Woodhead Publishing Limited, CambridgeEngland, pp 251256. 
202  Naik, N.K. and P.S. Shembekar. 1992. Elastic analysis of mixed composites, in Developments in the Sciences and Technology of Composite Materials, ECCM5 Proceedings, eds, A.R. Bunsell et al, EACM, BordeauxFrance, pp 109114. 
203  Naik, N.K. and Somdeo. 1992. Inplane shear properties of woven fabric composites, in the Proceedings of the 7th International Congress on Experimental Mechanics (ICEM7), Volume II, The Society for Experimental Mechanics, Inc., Bethel, pp 11861193. 
204  Naik, N.K. and V.K. Ganesh. 1992. Onaxes strengths of plain weave fabric composites, in the Proceedings of the Second International Symposium on Composite Materials and Structures (ISCMS2), eds, C.T. Sun and T.T. Loo, Peking University Press, Beijing, pp 938943. 
205  Shembekar, P.S. and N.K. Naik. 1991. Notched strength of woven fabric laminates for different stacking sequences, in Advances in Composite Materials, ICACM90 Proceedings, ASM International, ed., P. Ramakrishnan, Oxford & IBH Publishing Co. Pvt. Ltd., New Delhi, pp 205212. 
206  Bhatnagar, N., N.K. Naik and N. Ramakrishnan. 1991. Experimental investigations of drilling on CFRP Composites, in Processing and Manufacturing of Composite Materials, ASME1991, PEDVolume 49 / MD  Volume 27, eds, T.S. Srivatsan and S. Chandrashekhar, The American Society of Mechanical Engineers, New York, pp 7792. 
207  Naik, N.K. and P.S. Shembekar. 1990. Predictions of stiffness and notched strength of woven fabric composites, in Advances in Mechanical Engineering, 7th ISME Conference Proceedings, eds, R.S. Agarwal et al, Tata McGrawHill Publishing Company Limited, New Delhi, pp 8897. 
208  Ganesh, V.K., P.S. Shembekar and N.K. Naik. 1990. On the effect of fibre and resin properties on the interior stress distribution in FRP composites with circular holes, in Advances in Mechanical Engineering, 7th ISME Conference Proceedings, eds, R.S. Agarwal et aI, Tata McGrawHill Publishing Company Limited, New Delhi, pp 98105. 
209  Roodpishi, A.M., N.K. Naik and R.P. Shimpi. 1990. On the influence of stacking sequence on compressive strength of woven fabric composites, in Advances in Structural Testing, Analysis and Design, ICSTAD Proceedings, Volume I, eds, V.S. Arunachalam et aI, Tata McGrawHill Publishing Company Limited, New Delhi, pp 132137. 
210  Anbarasu, R. and N.K. Naik. 1990. Residual stresses in woven fabric composites, in Advances in Structural Testing, Analysis and Design, ICSTAD Proceedings, Volume I, eds, V.S. Arunachalam et al, Tata McGrawHill Publishing Company Limited, New Delhi, pp 178183. 
211  Shembekar, P.S., M.V. Hosur, M.K. Verma and N.K. Naik. 1990. On the failure behavior of woven fabric composites, in Advances in Structural Testing, Analysis and Design, ICSTAD Proceedings, Volume I, eds, V.S. Arunachalam et aI, Tata McGrawHill Publishing Company Limited, New Delhi, pp 237242. 
212  Naik, N.K. and K.S. Sai Ram. 1988. Uniaxial failure of FRP orthotropic laminates with circular holes, in Composite Materials and Structures, Proceedings of the International Conference on Composite Materials and Structures (ICCMS88), eds, K.A.V. Pandalai and S.K. Malhotra, Tata McGrawHill Publishing Company Limited, New Delhi, pp 8692. 
213  Bhatnagar, N., N.K. Naik and N. Ramakrishnan. 1988. Some preliminary investigations on orthogonal machining of FRP composites, in the Proceedings of the 13th All India Machine Tool Design and Research (AIMTDR13) Conference, ed, B.N. Lahiri, Jadavpur University, Calcutta, pp B104B108. 
214  Naik, N.K. 1986. Optimum quasirectangular holes with minimum SCF in finite plates under uniaxial loading, in Computational Mechanics 86: Theory and Applications, Volume 2, Proceedings of the International Conference on Computational Mechanics (ICCM86), eds, G. Yagawa and S.N. Atluri, SpringerVerlag, Tokyo, pp x97xl 02. 
215  Naik, N.K. and KS. Sai Ram. 1986. Effect of fibre and resin properties on stress gradients around openings in FRP orthotropic plates, in the Proceedings of the International Symposium on Composite Materials and Structures (ISCMS), eds, T.T. Loo and C.T. Sun, Technomjc Publishing Co., Inc., Lancaster, PA, pp 100105. 
216  Naik, N.K. 1985. Optimum quasirectangular hole shapes in orthotropic beams under pure bending, in the Proceedings of the 30th Congress of ISTAM, New Delhi, pp 3946. 
217  Naik, N.K. 1985. Optimum noncentral hole shapes with minimum SCF in rotating disks by conformal transformation, in the Proceedings of the 30th Congress of ISTAM, New Delhi, pp 4754. 
218  Naik, N.K. and K. Rajaiah. 1984. Minimizing stress concentration in finite plates with two holes, in the Proceedings of the 5th International Congress on Experimental Mechanics (ICEM5), Montreal, Canada, pp 7680, Society for Experimental Stress Analysis. 
219  Naik, N.K. and R.D. Sahani. 1984. Measurement of residual stresses in composites by hole drilling method, in the Proceedings of the 5th International Congress on Experimental Mechanics (ICEM5),Montreal, Canada, pp 159163, Society for Experimental Stress Analysis. 
220  Naik, N.K. and K. Rajaiah. 1984. Software development for hole shape optimization in finite plates, in the Proceedings of the International 84 AMSE Conference on Modelling and Simulation, Athens, Greece, Vol 3.1, pp 1119. 
221  Naik, N.K. and K. Rajaiah. 1984. Optimum quasisquare hole shapes in orthotropic beams under pure bending, in the Proceedings of the International 84 AMSE Conference on Modelling and Simulation, Athens, Greece, Vol 3.1, pp 133135. 
222  Rajaiah, K. and N.K. Naik. 1983. Hole shapes with minimum stress concentration in infinite isotropic plates using conformal transformation, ISME Journal of Engineering Design, 1:1519. 
223  Naik, N.K. and R.D. Sahani. 1982. Study of adhesive bonded joint parameters, in the Proceedings of the 5th ISME Conference, Allahabad, pp 193197. 
224  Rajaiah, K. and N.K. Naik. 1982. Hole shapes with minimum stress concentration in infinite isotropic plates using conformal transformation, in the Proceedings of the 5th ISME Conference, Allahabad, pp 217222. 
PRESENTATIONS AT INTERNATIONAL CONFERENCES 

225  Naik, N.K., Addis Asmelash and D. Sitpal. 2005. Behavior of composite materials under high strain rate loading, Paper presented at 2005 ASME International Mechanical Engineering Congress and Exposition, Paper IMECE200583085, Program p 39. 
226  Naik, N.K. and P. Shrirao. 2003. Composite structures under ballistic impact, in the Proceedings of ICCS12, eds, I.H. Marshall and R. Jones, Paper 86. 
227  Reddy, B.C.K., Piyush Shrirao and N.K. Naik. 2002. Ballistic impact on brittle composites: shearplugging phenomenon, in Contemporary Research in Theoretical and Applied Mechanics, Proceedings of the 14th US National Congress of Theoretical and Applied Mechanics (14 USNCTAM), eds, R.C. Batra and E.G. Henneke, Virginia Tech, Blacksburg, p 363. 
228  Naik, N.K. and K. Rajaiah. 1984. Quasirectangular holes with maximum failure strength in large orthotropic plates, in Abstracts of Lectures  Proceedings of the 16th International Congress of Theoretical and Applied Mechanics (ICTAM16) held at Lyngby, Copenhagen, Denmark, Paper 295, IUTAM 
CONFERENCE PRESENTATIONS 

229  Naik, N.K. and Santosh Kumar. February 2013. Performance of ceramiccomposite armors under ballistic impact loading, Paper presented at the 4th International Conference on Recent Advances in Composite Materials (ICRACM13), Goa, Honored Lecture, Paper HL 8, Abstracts, p. 3. 
230  Pandya, K.S. and N.K. Naik. February 2013. Ballistic impact behavior of hybrid composites: Analytical studies, Paper presented at the 4th International Conference on Recent Advances in Composite Materials (ICRACM13), Goa, Paper PP132, Abstracts, pp. 134135. 
231  Naik, N.K. February 2008. Thermomechanical behavior of 3D woven and braided composites, Paper presented at the International Conference and Exhibition on Reinforced Plastics (ICERP2008), Mumbai, FRP Institute, Invited Lecture, Paper INNP3. 
232  Naik, N.K. January 2006. Ballistic impact behavior of composite structures, Paper presented at the National Seminar on Frontiers in Aerospace Structures (FAST 2006), Aeronautical Society of India, Thiruvananthapuram, Abstracts, p 1. 
233  Naik, N.K. December 2004. Ballistic impact behavior of composite structures, Paper presented at the International Conference on Recent Advances in Composite Materials (ICRACM2004), BHU, Varanasi, Abstract of Papers, Paper lP6, pp 23. 
234  Naik, N.K. and G. Nageswara Rao. September 2004. Functionally gradient 3D woven composites as insert materials for sandwich structures, Paper presented at the 14th International Workshop on Computational Mechanics of Materials (IWCMM14), Goa, Book of Abstracts, Paper 54, P 112. 
235  Nageswara Rao G., U. Agrawal and N.K. Naik. September 2003. Honeycomb sandwich structures with inserts and attachments: throughthethickness loading, Paper presented at the 2nd ISAMPE National Conference on Composites (INCCOM2) and XII National Seminar on Aerospace Structures (XlI NASAS), Bangalore. 
236  MaIlik, M.P., M.P.S.K. Kiran, R. Kamada, A. Panda and N.K. Naik. October 2002. Ballistic impact and compression after impact characteristics of plain weave fabric composites: effect of target thickness, Paper presented at Conference on Progress in Composite Materials (cpcm  2002), ASM International, India Council, Mumbai. 
237  Agrawal, U. and N.K. Naik. October 2002. Honeycomb sandwich panels with throughthethickness localized loads, Paper presented at Conference on Progress in Composite Materials (cpcm  2002), ASM International, India Council, Mumbai. 
238  Joglekar, M.N. and N.K. Naik. October 2002. Impact and compression after impact characteristics of plain weave fabric composites: damage initiation studies, Paper presented at Conference on Progress in Composite Materials (cpcm  2002), ASM International, India Council, Mumbai. 
239  Mathew, J., N. Ramakrishnan and N.K. Naik. January 1997. Hole making on GFRP composites with trepanning tools: cutting mechanisms and hole quality, Paper presented at the 17th All India Manufacturing Technology, Design and Research (AIMTDR) Conference, Warangal. 
240  Naik, N.K. January 1995. Polymer matrix composites: design and technology, Paper presented at the 9th National Convention of Metallurgists and Material Scientists, Bombay. 
241  Ganesh, V.K., V. Ramprasad and N.K. Naik. February 1994. Failure behaviour of mixed UDWF composites under onaxis uniaxial tensile loading, Paper presented at the Conference Composites94, VSSC, Thiruvananthapuram. 
242  Naik, N.K. and V.K. Ganesh. December 1993. Damage mechanism in woven fabric composites under uniaxial tensile loading: effect of weave parameters, Paper presented at National Seminar on Aero Structures (NASAS1993), lIT, Kanpur, Extended Abstracts, pp 8182. 
243  Naik, N.K. and V.K. Ganesh. September 1992. Onaxes in plane shear strength of plain weave fabric composites, Paper presented at National Conference on Composites: Science & Technology (NCCST92), lIT, Bombay 
244  Behera, B.K., V.K. Ganesh and N.K. Naik. December 1991. Effect of laminate construction on curing stresses in FRP composites, Paper presented at the 36th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM36), Bombay, Abstract of Papers, pp 101102. 
245  Shah, M.S., P.S. Shembekar and N.K. Naik. February 1990. Prediction of notched strength of composites using finite element analysis and fracture mechanics, Paper presented at the Fifth National Convention of Aerospace Engineers (NCAE5), Chandigarh 
246  Arya, H., N.K. Naik and B. Roy. February 1990. Axial flow fan blades of fibre reinforced plastics  tooling details, Paper presented at the Fifth National Convention of Aerospace Engineers (NCAE5), Chandigarh. 
247  Bhatnagar, N., N.K. Naik and N. Ramakrishnan. February 1990. Drilling of holes in GFRP Composites, Paper presented at the Fifth National Convention of Aerospace Engineers (NCAE5), Chandigarh. 
248  Biswas, K. and N.K. Naik. February 1990. Optimisation of hole shape in an orthotropic plate under uniaxial load by minimisation of strain energy density, Paper presented at the Fifth National Convention of Aerospace Engineers (NCAE5), Chandigarh. 
249  Anbarasu, R. and N.K. Naik. February 1990. Residual stresses in FRP composites, Paper presented at the 7th Indian Society of Mechanical Engineers (ISME7) Conference, New Delhi, Conference Proceedings, p 121. 
250  Roodpishi, A.M. and N.K. Naik. January 1990. On the failure behaviour of woven fabric composites with centre cracks, Paper presented at the International Conference on Advances in Composite Materials (ICACM90), ASM International, Bombay, Conference Souvenir, p 40. 
251  Naik, N.K., B. Roy and H. Arya. December 1988. Axial flow fan blades of fibre reinforced plastics, Paper presented at the Seminar on Quality and Technology in Aerospace, HAL, Bangalore. 
252  Sur, A., N.K., Naik and N. Ramakrishnan. November 1988. Drilling of fibre reinforced plastics, Paper presented at the 13th AIMTDR Conference, Calcutta, Conference Proceedings, p B93. 
253  Naik, N.K. February 1988. Uniaxial failure of CFRP orthotropic laminates with circular holes  effect of process parameters, Paper presented at the Workshop cum Symposium on Composites Design, Bangalore. 
254  Shimpi, R.P. and N. K. Naik. December 1987. Optimum quasirectangular holes in orthotropic plates using strain energy consideration, Paper presented at the 32nd Congress of ISTAM, lITBombay. 
255  Naik, N.K., Ravindra Kumar, Anoop Jharia, S.P. Pai and R.P. Shimpi. December 1987. Uniaxial failure of carbon cloth epoxy quasiisotropic laminates with circular holes, Paper presented at the 32nd Congress of ISTAM, lITBombay. 
256  Naik, N.K., Anoop Jharia and R.P. Shimpi, December 1987. Failure analysis of composite laminates, Paper presented at the 32nd Congress of ISTAM, lITBombay. 
257  Naik, N.K. and K.S. Sai Ram. September 1985. Stress gradients around circular holes in FRP laminae, in Abstracts of the Technical Papers  Second National Symposium on Industrial Applications of Composites, Organised by the Indian Society for Composite Materials, Bhopal, pp 34. 
258  Naik, N.K., T.C. Gupta and K. Rajaiah. January 1984. Optimum hole shapes in rotating disks by photoelasticity, in the Proceedings of the All India Seminar on Structural Integrity of Rotating Machinery, Organised by the Institution of Engineers (India), Bangalore, Paper 2, pp 112. 
259  Naik, N.K. and R.D. Sahani. November 1983. Development of facility for residual stress measurement in FRP composites by hole drilling method, Paper presented at the 35th AGM, AeSI, Bombay. 
260  Naik, N.K. November 1983. Cost of quality in Aircraft Industry, Paper presented at the 35th AGM, AeSI, Bombay. 
261  Rajaiah, K. and N.K. Naik. December 1982. Minimizing stress concentration around two neighbouring holes in disks and plates with photoelasticity, Paper presented at the 5th ISME Conference, Allahabad. 
262  Rajaiah, K. and N.K. Naik. December 1982. An analytical approach for the optimization of hole shapes in CFRP orthotropic composite plates, Paper presented at the 34th ACM, AeSI, Madras. 
263  Rajaiah, K., N.K. Naik and R. Ramesh Kumar. December 1982. Use of conformal transformation technique for determination of hole shapes with minimum stress concentration in plates and shells, Paper presented at the Silver Jubilee Symposium on Recent Advances in Mechanics, lIT, Bombay. 
264  Shevare, G.R., N.K. Naik and H.N. Kota. December 1980. Computer aided design of surfaces, in 9th AIMTDR Conference Proceedings, Kanpur, Paper No. 9AIMTDR/CADM66. 
265  Naik, N.K. and S.B. Dighe. December 1980. Contouring honeycomb core by chemical milling, in 9th AIMTDR Conference Proceedings, Kanpur, Paper No. 9AIMTDR/UMP68. 
266  Naik, N.K. October 1980. Tooling coordination for precision aerospace components, in the Proceedings of ISRO Symposium on Fabrication Technology, VSSC, Trivandrum, Volume I, pp II 231  II 247. 
267  Naik, N.K., Nitin Rameshchandra and G.R. Shevare. September 1979. Handoperated honeycomb core expansion setup, Paper presented at the 31st AGM, AeSI, Bombay. 
268  Naik, N.K. September 1979. Development of aircraft production engineering discipline at lIT Bombay, Paper presented at the 31st AGM, AeSl, Bombay. 
269  Naik, N.K. and G.A. Molodtsov. 1974. Investigation of residual microstresses in composite materials, Metallurgical Engineer, lITBombay, Volume 5, pp 2226. 
270  Molodtsov, G.A. and N.K. Naik. August 1972. Residual microstresses in composite materials, Paper presented at the First Conference on Reinforced Plastics and their Aerospace Applications, VSSC, Trivandrum. 
TECHNICAL REPORTS 

271  Naik, N.K., Ch. Veerraju and Venkateswara Rao Kavala. December 2009. Hybrid Composites under High Stain Rate Compressive Loading, Technical Report No. IITB/AE/NKN/ARDB/SP/TR/1051302/2009/01, IIT Bombay, Mumbai. 
272  Naik, N.K., G. Ravikumar, N.M. Thoram, Jayaram R. Pothnis, Makarand Joshi and Kiran Akella. June 2009. Analytical Prediction of High Strain Rate Behavior of Composites under Compressive Loading and Studies on Effect of Radial Constraints, Technical Report No. R&DEE/IITB/AE/NKN/HSRTHEORY/TR/2009(2), IIT Bombay, Mumbai. 
273  Naik, N.K., Rakesh Soni, H.N. Krishna Teja Palleti, Raviraj Vaidya, Ajey Bhoge, G. Ravikumar and Benny John. May 2009. Analysis and Design of Turbine Missile Shield, Technical Report No. NPCIL/IITB/AE/NKN/SHIELD/TR/2009, IIT Bombay, Mumbai. 
274  Naik, N.K., G. Ravikumar, N.M. Thoram, Makarand Joshi and Kiran Akella. January 2009. Experimental Characterization of Compressive, Tensile, Inplane Shear and Interlaminar Shear Properties under High Strain Rate Loading, Technical Report No. R&DEE/IITB/AE/NKN/HSREXPT/TR/2009(1), IIT Bombay, Mumbai. 
275  Naik, N.K. October 2007. Sandwich Structures with Composite Inserts: Experimental Studies, Technical Report No. IITB/AE/NKN/ISRO/COMPOSINSERTS/TR/2007/01, IITBombay, Mumbai. 
276  Naik, N.K. and Venkateswara Rao Kavala. December 2006. Strain Rate Effects on the Mechanical Behavior of Composites, Technical Report No. IITB/AE/NKN/ARDB/SP/TR/1051204/2006/02, IITBombay, Mumbai. 
277  Naik, N.K. and Santosh Kumar. December 2006. Ballistic Impact Behavior of Ceramic Composite Armors, Technical Report No. R&DEE/IITB/AE/NKN/ARMOR/TR/2006, IITBombay, Mumbai. 
278  Naik, N.K., B. Santhosh, Rajeev G. Nair and Shrinivas A. Pottigar. November 2006. Thermomechanical Analysis of Textile Composites, Technical Report No. VSSC/IITB/AE/NKN/3DTC/TR/2006, IITBombay, Mumbai. 
279  Naik, N.K. and G. Nageswara Rao. June 2004. Honeycomb Sandwich Structures with Composite Inserts: Comparison of Fully Potted and ThroughtheThickness Inserts, Technical Report No. IITB/AE/lSRO/3DCS/TR/2004/02, IITBombay, Mumbai. 
280  Naik, N.K. and G. Nageswara Rao. May 2004. Honeycomb Sandwich Structures with ThroughtheThickness Inserts: Localized ThroughtheThickness Loading, Technical Report No. IITB/AE/lSRO/3DCS/TR/2004/01, IITBombay, Mumbai. 
281  Naik, N.K. and D. Sitpal. March 2004. Design and Development of Split Hopkinson Pressure Bar Apparatus: Compressive Loading, Technical Report No. IITB/AE/ARDB/SP/TR/1051204/2004/01, lITBombay, Mumbai. 
282  Naik, N.K. May 2003. Mechanical and PhysicoChemical Properties of Bomboos, Technical Report No. IITB/AE/NKN/TIFAC/BAMBOO/02/2003, IITBombay, Mumbai. 
283  Naik, N.K. February 2003. Impact Behavior of Advanced Composites: Drop Weight Impact and CompressionAfterImpact Characterization, Technical Report No. IITB/AE/ADA/IMPACT/2003, IITBombay, Mumbai. 
284  Naik, N.K. and E. Sridevi. May 2001. An Analytical Method for Thermoelastic Analysis of 3D Orthogonal Interlock Woven Composites, Technical Report No. IITB/AE/ISRO/3D/TR/2001/03, IITBombay, Mumbai. 
285  Naik, N.K. and Sk.N.M. Azad. April 2001. Stress and Failure Analysis of 3D Orthogonal / Angle Interlock Woven Composites Under Tensile Loading, Technical Report No. IITB/AE/ISRO/3D/TR/2001/02, IITBomaby, Mumbai. 
286  Naik, N.K. and S.I. Tiwari. December 2000. An Analytical Model for Compressive Strength of Plain Weave Fabric Composites, Technical Report No. IITB/AE/ARDB/SP/TR/890/2000/05, lITBombay, Mumbai. 
287  Naik, N.K. and S. Meduri. February 2000. Polymer Matrix Woven Fabric Composites Subjected to Low Velocity Impact: Effect of Plate Thickness, Technical Report No. llTB/AE/ARDB/SP/TR/890/2000/04, IITBombay, Mumbai. 
288  Naik, N.K. and S. Meduri. February 1999. Polymer Matrix Woven Fabric Composites Subjected to Low Velocity Impact: Damage Initiation Studies, Technical Report No. IITB/AE/ARDB/SP/TR/890/99/03 lITBombay, Mumbai. 
289  Naik, N.K. and Y. Chandrasekher. February 1998. Damage in Laminated Composites due to Low Velocity Impact: Technical Report No. IITB/AE/ARDB/SP/TR/890/98/02, lITBombay, Mumbai. 
290  Naik, N.K. and B.J. Thuruthimattam. January 1998. Behavior of 3D Orthogonally Woven Composites under Tensile Loading, Technical Report No. IITB/AE/ISRO/3D/TR/98/01, lITBombay, Mumbai. 
291  Naik, N.K. and V. Madhavan. December 1997. Elastic Behavior of Twisted Impregnated Yarns, Technical Report No. IITB/AE/ARDB/SP/890/97/01, IITBombay, Mumbai. 
292  Naik, N.K. and V.K. Ganesh. September 1994. ThermoElastjc Analysis of Plain Weave Fabric Laminates, Technical Report No. IITB/AE/ARDB/SP/TR/659/94/04, IIT, Bombay. 
293  Naik, N.K. and V.K. Ganesh. October 1993. Failure Behavior of Plain Weave Fabric Laminates Under InPlane Shear Loading, Technical Report No. IITB/AE/ARDB/STR/659/93/03, IIT, Bombay. 
294  Naik. N.K. and V.K. Ganesh. February 1993. Failure Behavior of Plain Weave Fabric Laminates Under OnAxes Uniaxial Tensile Loading, Technical Report No. IITB/AE/ARDB/STR/659/93/02, I IT, Bombay. 
295  Naik, N.K., B. Roy and H. Arya. November 1991. Design, Fabrication and Testing of FRP Blades and Disks for Axial Flow Compressors / Fans, Technical Report No. IITB/AE/ARDB/MP/490/91, IIT, Bombay. 
296  Naik, N.K. and P.S. Shembekar. October 1991. Elastic Analysis of Woven Fabric Composites, Technical Report No. IITB/AE/ARDB/STR/659/91/01, lIT, Bombay. 
297  Naik, N.K. and P.S. Shembekar. October 1991. Failure Strength of FRP Orthotropic Laminates with Openings, Technical Report No. IITB/AE/ARDB/483/91, lIT, Bombay. 
298  Naik, N.K., K. Rajaiah and R. Ramesh Kumar. October 1985. Fatigue Characteristics of Aluminum Alloy Plates with Optimized Holes / Openings, ARDB Final Technical Report, lIT, Bombay. 
299  Rajaiah, K., N. Ramaswamy, N.K. Naik, V.P. Sunder Singh, S. Suryanarayan and C.P. Jam. February 1982. Design, Fabrication and Testing of Composite Structural Elements by Pultrusion Process, ARDB Final Consolidated Technical Report, lIT, Bombay. 
300  Rajaiah, K. and N.K. Naik. December 1981. QuasiRectangular Holes for Minimizing Stress Concentrations in Infinite Plates under lnplane Loading, Technical Report No. AE TR 811201, IIT, Bombay. 
301  Naik, N.K., Nitin Rameshchandra and G.R. Shevare. September 1981. HandOperated Honeycomb Core Expansion Setup, Technical Note No. AE TN 810901, IIT, Bombay. 